Skip to content

Get the app

Study guide · 4.2

Dosage and infusion calculation

This topic covers the arithmetic of safe medication: converting units, working out doses and volumes, and setting infusion rates by pump or by gravity. Questions give a prescription, the stock and often the weight, and ask for one number rounded exactly as the stem states, so set out the formula, convert first and round only at the end.

A study feature written by ExamDragon, not part of the real exam and not from DHP. DHP publishes no blueprint: this topic and its area, Pharmacology and medication safety, are ours.

At a glance

Area 4
of our blueprint
Mock questions
3
Practice questions
6
Key terms
8

What this guide covers

  1. Units, conversions and safe writing
  2. Oral and injection doses
  3. Infusion rates by pump and by gravity
  4. Infusions prescribed by dose

1Units, conversions and safe writing

  • 1 g = 1,000 mg; 1 mg = 1,000 micrograms; 1 L = 1,000 mL; one hour = 60 minutes. Put the prescription and the stock into the same unit before any calculation.
  • Write micrograms and units in full; use a leading zero (0.5 mg, never .5 mg) and no trailing zero in a prescription or record (5 mg, never 5.0 mg).
  • Use the patient's current weight in kilograms; to convert from pounds, divide by 2.2.
  • Round only at the end and exactly as the question states (one decimal place, or the nearest whole number); drops per minute are always a whole number.
  • Check that the answer is sensible: a volume of many ampoules, or a dose ten times the usual, means a step has gone wrong.
  • Calculations for high-alert infusions are checked independently by a second nurse where hospital policy requires it.
Worked example
  1. The situationDigoxin 125 micrograms orally is prescribed. The tablets in stock are 0.25 mg each.
  2. Step 1Convert the stock to the unit of the prescription: 0.25 mg x 1,000 = 250 micrograms.
  3. Step 2Apply the formula: 125 micrograms / 250 micrograms x 1 tablet = 0.5 tablet.
  4. Step 3Check that the result is sensible and that the tablet is scored, or ask pharmacy for a 125 microgram tablet.
  5. Where questions turnDividing without converting first gives an answer a thousand times wrong.
  6. TakeawaySame units first, then the formula.

2Oral and injection doses

  • Volume to give = (dose required / dose in stock) x volume of stock.
  • Number of tablets = dose required / strength of one tablet.
  • Weight-based dose: total dose = dose per kg x weight in kg; then find the volume with the formula above.
  • Check a child's dose against the safe range in the reference, for example paracetamol about 15 mg/kg per dose: a 12 kg child, 180 mg.
  • A liquid: paracetamol 180 mg from a suspension of 120 mg in 5 mL is 180 / 120 x 5 = 7.5 mL.
  • For a powder, use the concentration after reconstitution printed on the label (for example 1 g made up to 10 mL is 100 mg/mL).
Worked example
  1. The situationMr Tariq, 64 kg, is prescribed gentamicin 5 mg/kg intravenously once daily. The vial contains 40 mg/mL. The answer is needed to one decimal place.
  2. Step 1Find the total dose: 5 mg/kg x 64 kg = 320 mg.
  3. Step 2Find the volume: 320 mg / 40 mg x 1 mL = 8 mL.
  4. Step 3Round as asked, to one decimal place: 8.0 mL, and check that 320 mg is a sensible daily dose for his weight.
  5. Where questions turnUsing the dose per kilogram (5 mg) as the whole dose, or dividing the stock by the dose.
  6. TakeawayWeight first, then dose required / stock x volume.

3Infusion rates by pump and by gravity

  • Pump rate (mL/h) = total volume (mL) / time (h); 30 minutes is 0.5 h, so 100 mL over 30 minutes is 200 mL/h.
  • 1 L of sodium chloride 0.9% over 6 hours: 1,000 / 6 = 166.67, which is 167 mL/h to the nearest whole number.
  • Gravity rate (drops/min) = volume (mL) x drop factor (drops/mL) / time (minutes).
  • Read the drop factor on the giving set packaging: a standard set for clear fluids is often 20 drops/mL, a blood set 15 drops/mL and a paediatric microdrop set 60 drops/mL.
  • Time to run = volume / rate: 500 mL at 125 mL/h takes 4 hours. Volume given = rate x time.
  • An infusion that has fallen behind is not speeded up to catch up without a prescription.
Worked example
  1. The situationNo pump is available. Glucose 5% 500 mL is prescribed over 4 hours with a giving set of 20 drops/mL. The answer is needed to the nearest whole number.
  2. Step 1Convert the time to minutes: 4 h x 60 = 240 minutes.
  3. Step 2Multiply the volume by the drop factor: 500 mL x 20 = 10,000 drops.
  4. Step 3Divide by the minutes: 10,000 / 240 = 41.67 drops/min.
  5. Step 4Round to the nearest whole number: 42 drops/min.
  6. Where questions turnForgetting to convert hours to minutes gives 2,500 drops/min.
  7. TakeawayDrops per minute = volume x drop factor / minutes.

4Infusions prescribed by dose

  • First find the concentration per mL: the amount in the bag or syringe / its volume.
  • Rate (mL/h) = dose per hour / concentration per mL.
  • Heparin 25,000 units in 500 mL is 50 units/mL; 1,000 units/h / 50 units/mL = 20 mL/h.
  • Insulin 50 units in 50 mL of sodium chloride 0.9% is 1 unit/mL, so units per hour and mL per hour are the same number.
  • For micrograms/kg/min: dose x weight = micrograms per minute; x 60 = micrograms per hour; convert to mg if the concentration is in mg; then divide by the concentration.
  • To check a running infusion, work backwards: dose given per hour = rate x concentration.
Worked example
  1. The situationMr Khalid, 78 kg, is prescribed dobutamine 5 micrograms/kg/min. The infusion contains 250 mg in 250 mL of glucose 5%. The answer is needed to one decimal place.
  2. Step 1Find the concentration: 250 mg / 250 mL = 1 mg/mL, which is 1,000 micrograms/mL.
  3. Step 2Find the dose per minute: 5 x 78 = 390 micrograms/min.
  4. Step 3Find the dose per hour: 390 x 60 = 23,400 micrograms/h.
  5. Step 4Divide by the concentration: 23,400 / 1,000 = 23.4 mL/h.
  6. Where questions turnForgetting the factor of 60 gives 0.39 mL/h, a dose far too small.
  7. TakeawayPer kilogram per minute: x weight, x 60, / concentration.

Key terms

Dose required
The dose the prescription asks for, in the same unit as the stock before calculating.
Stock strength
The amount of drug in one tablet, or in a stated volume of liquid, as supplied.
Concentration
The amount of drug in each millilitre of a solution, such as 50 units/mL.
Drop factor
The number of drops a giving set delivers per millilitre, printed on its packaging.
Volumetric pump
An infusion pump that delivers a set volume per hour, in mL/h.
Reconstitution
Dissolving a powder with a stated diluent and volume to give a known concentration.
Weight-based dosing
A dose prescribed per kilogram of body weight, multiplied by the current weight.
Leading zero
The zero written before a decimal point (0.5 mg) so that the dose cannot be misread as 5 mg.

Easy to confuse

  • Dividing the stock by the dose instead of the dose by the stock.
  • Forgetting a conversion: litres to millilitres, milligrams to micrograms, hours to minutes.
  • Rounding in the middle of a calculation instead of once at the end.
  • Using the dose per kilogram as the total dose.
  • Taking the drop factor from memory instead of from the packaging or the stem.

After this guide: You should be able to set out each formula, convert units first, calculate doses, volumes and rates, and round exactly as the question asks.

Practise 4.2 (6 questions)