Study guide · 3.7
Medication administration and dosage calculation
This topic covers dosage calculation, infusion rates and the safe administration of medicines, including high-alert drugs, insulin, identification of the client and what to do after an error or an adverse effect. Calculation questions give the prescription and the stock and ask for one answer, rounded as stated; safety questions ask for the correct step or the first action.
A study feature written by ExamDragon, not part of the real exam and not from OMSB. Adult Health is a domain of the OEN booklet; this topic inside it is ours.
At a glance
Domain 3- Mock questions
- 2
- Practice questions
- 9
- Key terms
- 8
What this guide covers
1The core dose formula
- Dose to give equals dose wanted divided by dose available, multiplied by the volume the stock comes in.
- Convert units first so they match: 1 g is 1000 mg and 1 mg is 1000 micrograms.
- Example: paracetamol 1 g from a suspension of 250 mg in 5 mL is 1000 divided by 250, multiplied by 5, which gives 20 mL.
- Round only at the end, and only as the question instructs.
- Before giving it, ask whether the answer is sensible; recheck a dose that seems unusually large or small.
- The situationParacetamol 1 g orally is prescribed. The pharmacy supplies an oral suspension of 250 mg in 5 mL.
- Step 1Convert: 1 g is 1000 mg.
- Step 2Apply the formula: 1000 divided by 250 is 4, and 4 multiplied by 5 mL is 20 mL.
- Step 3Check: 20 mL for a full adult dose is plausible.
- Where questions turnLeaving the dose in grams gives 0.02 mL, an answer that is out by a factor of 1000.
- TakeawaySame units first, then wanted over available times volume.
2Infusion rates
- Drip rate in drops per minute equals the volume in mL multiplied by the drop factor, divided by the time in minutes.
- Example: 1000 mL over 8 hours with a set of 20 drops per mL is 1000 multiplied by 20, divided by 480, which is 41.7 and rounds to 42 drops per minute.
- Pump rate in mL/h equals the volume divided by the time in hours.
- Example: 250 mL over 90 minutes is 250 divided by 1.5, which is 166.7 and rounds to 167 mL/h.
- For a dose-based infusion, find the concentration first, then divide the hourly dose by it.
- Example: heparin 25 000 units in 500 mL is 50 units per mL, so 1000 units per hour runs at 20 mL/h.
- The situationSodium chloride 0.9% 1000 mL is to run over 8 hours through a gravity set that delivers 20 drops per mL.
- Step 1Convert the time: 8 hours is 480 minutes.
- Step 2Multiply the volume by the drop factor: 1000 multiplied by 20 is 20 000.
- Step 3Divide by the minutes: 20 000 divided by 480 is 41.7, rounded to 42 drops per minute.
- Where questions turnDividing by 8 hours instead of 480 minutes gives an answer 60 times too high.
- TakeawayDrip rates use minutes; pump rates use hours.
3Weight-based doses
- Find the total dose first: the dose per kg multiplied by the client's weight in kg.
- Then find the volume: the total dose divided by the concentration of the stock.
- Example: gentamicin 5 mg/kg for a 72 kg client is 360 mg; from a vial of 40 mg/mL that is 9.0 mL.
- Use a current weight in kilograms, never an estimate when a weight can be measured.
- Have weight-based and high-alert intravenous doses checked independently, as hospital policy requires.
- The situationGentamicin 5 mg/kg intravenously is prescribed for a client who weighs 72 kg. The vial contains 40 mg/mL.
- Step 1Total dose: 5 multiplied by 72 is 360 mg.
- Step 2Volume: 360 divided by 40 is 9.0 mL.
- Step 3Have the calculation checked independently before drawing it up.
- Where questions turnCandidates divide 5 mg by 40 mg/mL and forget to multiply by the weight.
- TakeawayPer kg: total dose first, then volume.
4Safe administration
- Identify the client with at least two identifiers, such as full name and date of birth, checked against the wristband and the medication record.
- Where possible, ask the client to state their details rather than confirm them; never use a room or bed number.
- Follow the rights of medication administration: right client, drug, dose, route, time and documentation.
- When mixing soluble and isophane insulin in one syringe, draw up the clear soluble insulin before the cloudy isophane insulin.
- Write insulin doses as units in full, never as U, and have insulin checked according to hospital policy.
- High-alert medicines such as insulin, heparin and opioids carry a high risk of serious harm if given in error.
- The situationA client is prescribed soluble insulin 6 units and isophane insulin 14 units in one syringe.
- Step 1Inject air into the cloudy vial without drawing up.
- Step 2Inject air into the clear vial and draw up its 6 units first.
- Step 3Then draw up the 14 units of isophane: a total of 20 units.
- Where questions turnDrawing the cloudy insulin first risks contaminating the clear vial with isophane.
- TakeawayClear before cloudy.
5Errors and adverse effects
- After a medication error, the first action is to assess the client for harm.
- Then inform the physician, follow the instructions, complete an incident report and be open with the client.
- Incident reporting supports learning and safer systems rather than blame.
- Excessive sedation and a respiratory rate below 8 to 10 per minute after an opioid indicate respiratory depression.
- Stimulate the client, support the airway, give oxygen and the prescribed naloxone, and call for help.
- Naloxone can wear off before the opioid, so close monitoring continues.
- The situationA nurse realises she gave a client metoprolol 50 mg that was prescribed for the client in the next bed.
- Step 1Think of the drug's effect: a beta-blocker lowers heart rate and blood pressure.
- Step 2Assess the client's heart rate and blood pressure first.
- Step 3Then inform the physician, follow the instructions, complete an incident report and tell the client.
- Where questions turnFilling in the incident report or phoning the physician first leaves the client unassessed.
- TakeawayAfter an error: client first, then report.
Key terms
- Dose wanted
- The dose prescribed for the client, in the same unit as the stock.
- Dose available
- The amount of drug in the stated volume of the stock, such as 250 mg in 5 mL.
- Drop factor
- The number of drops per mL that a gravity giving set delivers, printed on its packet.
- Concentration
- The amount of drug in each mL of a solution, such as 50 units per mL.
- High-alert medication
- A drug such as insulin, heparin or an opioid that can cause serious harm if given in error.
- Independent double check
- A second qualified person checking a calculation and dose separately, without seeing the first answer.
- Isophane insulin
- An intermediate-acting cloudy insulin that must be rolled to mix before use.
- Naloxone
- An opioid antagonist that reverses respiratory depression but may wear off before the opioid.
Easy to confuse
- Forgetting to convert grams to milligrams, which puts the answer out by a factor of 1000.
- Using hours instead of minutes in a drip rate, which puts the answer out by a factor of 60.
- Swapping dose wanted and dose available in the formula.
- Writing the incident report before assessing the client after an error.
After this guide: You should be able to calculate oral, injectable, weight-based and infusion doses with correct units and rounding, identify the client and give high-alert medicines safely, and act first on the client after an error or an opioid overdose.
Practise 3.7 (9 questions)