Skip to content

Get the app

Study guide · Virtual OSCE · Category 1

Operative Dentistry

About 16% of the Virtual OSCE · 4 topics

Operative Dentistry covers the diagnosis, risk assessment and restoration of caries and other hard tissue defects in permanent and primary teeth. It is the largest category, about 16% of the Virtual OSCE in NDEB's 2026 blueprint. Questions ask you to read a radiograph or photo, judge caries activity and risk, choose between preventive, minimally invasive and restorative options, and pick the right material, technique and anesthesia.

A study feature written by ExamDragon, not part of the real exam. NDEB publishes the category and its weight, nothing finer; the 4 topics below are ours.

At a glance

Category 1
16%

of the Virtual OSCE, as NDEB weights it in its 2026 Protocol (plus or minus 5)

Weight
16%
Topics
4
Key terms
10

What this guide covers, topic by topic

  1. OP-1Caries risk and lesion activity
  2. OP-2Deep caries and pulp protection
  3. OP-3Choosing the restorative material
  4. OP-4Radiographs and anesthesia for operative care

OP-1Caries risk and lesion activity

  • Caries risk assessment combines history (new lesions in the last 3 years, sugar exposures, fluoride use, saliva flow, medications) with clinical findings; risk level drives recall interval, radiograph frequency and preventive intensity.
  • An active enamel lesion looks chalky white, matte and rough when dried; an arrested lesion is shiny, smooth and often brown. Activity, not colour alone, decides whether to treat.
  • Non-cavitated lesions are managed non-operatively: fluoride varnish (5% sodium fluoride, 22,600 ppm), resin infiltration or sealants, plus diet and hygiene changes.
  • Xerostomia from anticholinergics, antidepressants, antihistamines or head and neck radiation sharply raises root and cervical caries risk; consider high fluoride toothpaste (5000 ppm) for adults at high risk.
  • Silver diamine fluoride 38% (about 44,800 ppm fluoride) arrests cavitated lesions without drilling but stains the lesion black; obtain informed consent and show photos first.
  • Bitewing intervals follow risk: high risk adults roughly every 6 to 18 months, low risk adults every 24 to 36 months, never on a fixed schedule for everyone (ALARA).
  1. The situationA 58 year old started amitriptyline 8 months ago. She now has three new cervical lesions on canines and premolars, two soft and cavitated, one white and non-cavitated.
  2. Step 1Identify the driver: a new medication causing hyposalivation, with new lesions in a short time, places her at high caries risk.
  3. Step 2Restore the cavitated, soft lesions; glass ionomer or resin-modified glass ionomer suits cervical margins and releases fluoride.
  4. Step 3Manage the non-cavitated lesion with fluoride varnish and monitoring rather than a restoration.
  5. Step 4Prescribe 5000 ppm fluoride toothpaste, advise sugar-free gum or saliva substitutes, and consider asking the physician about the medication.
  6. Step 5Set a short recall (3 months) and bitewings at a shorter interval than for a low risk patient.
  7. Where questions turnRestoring every white spot lesion. A non-cavitated, cleansable lesion is arrested or remineralized with fluoride; drilling it starts the restorative cycle early.
  8. The takeawayTreat the cause of the caries, not only the holes, and match the material to the risk.
Practise Operative Dentistry

OP-2Deep caries and pulp protection

  • Before treating a deep lesion, record the pulp status: history of pain, cold test, percussion, and a periapical radiograph of the apex.
  • Selective caries removal leaves soft or leathery dentin over the pulp while the periphery is taken to hard dentin, so the seal is sound and pulp exposure is avoided.
  • Stepwise removal (two visits) is an option for very deep lesions; current evidence favours one-step selective removal in a tooth with normal pulp or reversible pulpitis.
  • Calcium silicate cements (MTA, tricalcium silicate) are preferred for direct pulp caps; calcium hydroxide works but dissolves and leaves tunnel defects in the bridge.
  • Direct pulp capping succeeds best for a small, clean, mechanical exposure in an asymptomatic tooth with bleeding controlled in a few minutes using sodium hypochlorite or saline.
  • Symptoms of lingering pain after cold or spontaneous pain point to irreversible pulpitis; a restoration alone will not help, and endodontic treatment or extraction is needed.
  1. The situationTooth 36 has a deep occlusal lesion reaching the inner quarter of dentin. Cold produces a sharp pain that stops within 2 seconds. No percussion tenderness; apex normal on the radiograph.
  2. Step 1Diagnose: normal pulp or reversible pulpitis with normal apical tissues.
  3. Step 2Give an inferior alveolar nerve block and isolate with a rubber dam.
  4. Step 3Remove caries to hard dentin at the enamel dentin junction and walls; leave leathery dentin over the pulp to avoid exposure.
  5. Step 4Place a calcium silicate or glass ionomer liner over the deepest area, then a bonded restoration that seals well.
  6. Step 5Recheck vitality and symptoms at follow up.
  7. Where questions turnRemoving all soft dentin over the pulp in an asymptomatic tooth. It increases exposure risk without benefit; the seal at the periphery is what stops the lesion.
  8. The takeawayIn a vital, symptom free tooth, avoiding exposure through selective removal protects the pulp better than chasing all soft dentin.
Practise Operative Dentistry

OP-3Choosing the restorative material

  • Composite resin needs good isolation and enamel for bonding; it is technique sensitive, shrinks on curing, and should be placed in increments of about 2 mm unless a bulk fill product is used.
  • Amalgam tolerates moisture better and lasts well in large posterior restorations; it needs mechanical retention, a 90 degree cavosurface margin and at least 1.5 to 2 mm of bulk.
  • Glass ionomer bonds chemically to tooth, releases fluoride and tolerates moisture; it is weaker, so it suits cervical, root surface and primary tooth lesions, or high risk patients.
  • Etch enamel with 30 to 40% phosphoric acid for about 15 to 30 seconds; dentin is etched more briefly and left moist for etch and rinse adhesives.
  • The configuration factor (bonded to unbonded surfaces) is highest in a Class I box, so stress from shrinkage is greatest there; incremental layering reduces it.
  • Large cusp loss (a cusp undermined or missing) is better restored with cuspal coverage (onlay or crown) than with an intracoronal restoration that wedges cusps apart.
  1. The situationA 9 year old with limited cooperation has a cavitated occlusal lesion on 46, which is partly erupted with a gingival operculum over the distal; saliva control is poor.
  2. Step 1Recognize that moisture control for composite will be unreliable.
  3. Step 2Choose glass ionomer or resin-modified glass ionomer as a moisture tolerant, fluoride releasing restoration.
  4. Step 3Plan to replace or overlay it with composite once the tooth is fully erupted and isolation is possible.
  5. Step 4Seal the other pits and fissures and apply fluoride varnish.
  6. Where questions turnChoosing composite because it is aesthetic when isolation is impossible. Contamination with saliva or blood breaks the bond and causes leakage and recurrent caries.
  7. The takeawayPick the material the conditions allow; a well placed glass ionomer beats a poorly bonded composite.
Practise Operative Dentistry

OP-4Radiographs and anesthesia for operative care

  • Bitewings detect interproximal caries and recurrent caries under restorations; radiographic depth usually underestimates histologic depth.
  • A radiolucency under a restoration may be a radiolucent liner, burnout (cervical overexposure) or Mach band effect; compare with clinical findings before re-treating.
  • Lidocaine 2% with epinephrine 1:100,000 contains 36 mg lidocaine and 0.018 mg epinephrine per 1.8 mL cartridge; the maximum dose is 7 mg/kg up to 500 mg.
  • Articaine 4% with epinephrine contains 72 mg per 1.8 mL cartridge; maximum 7 mg/kg. Its buccal infiltration often anesthetizes mandibular premolars and first molars.
  • For a patient with significant cardiovascular disease, limit epinephrine to about 0.04 mg per appointment (about 2 cartridges of 1:100,000), aspirate and inject slowly.
  • Mepivacaine 3% plain (54 mg per cartridge, maximum 6.6 mg/kg up to 400 mg) gives shorter pulpal anesthesia and is useful when epinephrine should be avoided.
  1. The situationA 60 kg adult with stable angina needs two restorations on 25 and 26. You plan lidocaine 2% with epinephrine 1:100,000. How many cartridges can you give?
  2. Step 1Anesthetic limit: 7 mg/kg times 60 kg equals 420 mg; 420 divided by 36 mg per cartridge equals 11.7 cartridges.
  3. Step 2Epinephrine limit for a cardiac patient: about 0.04 mg; each cartridge holds 0.01 mg/mL times 1.8 mL equals 0.018 mg.
  4. Step 30.04 divided by 0.018 equals 2.2, so the epinephrine limit allows about 2 cartridges.
  5. Step 4The lower of the two limits governs: plan for 2 cartridges, aspirate, inject slowly and monitor; a buccal and palatal infiltration fits within this.
  6. Where questions turnStopping at the milligram per kilogram calculation. In a cardiac patient the epinephrine limit is reached long before the local anesthetic maximum.
  7. The takeawayCalculate both the anesthetic and the vasoconstrictor limits; the smaller number is the true ceiling.
Practise Operative Dentistry

Key terms

Caries risk assessment
A structured review of history, diet, fluoride, saliva and clinical findings that classifies a patient as low, moderate or high risk to guide prevention and recall.
Arrested lesion
A caries lesion that is no longer progressing; usually shiny, hard and darker in colour.
Selective caries removal
Removing caries to hard dentin at the periphery while leaving soft or leathery dentin over the pulp to avoid exposure.
Direct pulp cap
Placement of a biocompatible material, ideally a calcium silicate cement, directly on a small vital pulp exposure.
Silver diamine fluoride
A 38% solution that arrests cavitated caries without drilling; stains the lesion black.
Configuration factor
Ratio of bonded to unbonded surfaces in a cavity; a higher value means more polymerization stress.
Resin-modified glass ionomer
A glass ionomer with added resin that light cures, is stronger than conventional glass ionomer and still releases fluoride.
Cavosurface margin
The junction between the cavity wall and the external tooth surface; amalgam needs a butt joint, composite benefits from an enamel bevel in some preparations.
Burnout
A radiographic dark band at the cervical area of teeth from overexposure of thin tissue; it can mimic root caries.
ALARA
As low as reasonably achievable: take radiographs only when they will change care, with the lowest dose that gives a diagnostic image.
After this guide: A 70 kg adult receives articaine 4% with epinephrine 1:100,000. What is the maximum number of 1.8 mL cartridges?
Show the answer

7 mg/kg times 70 kg is 490 mg; each cartridge has 72 mg, so 490 divided by 72 is 6.8, a ceiling of 6 full cartridges.

Practise Operative Dentistry

Built to NDEB's 2026 Virtual OSCE Protocol and its blueprint. The topics, explanations, worked examples and traps are ExamDragon's own. Every source this path is built on.