Skip to content

Get the app

Study guide · Virtual OSCE · Category 7

Prosthodontics

About 10% of the Virtual OSCE · 4 topics

Prosthodontics covers replacing missing teeth and restoring heavily damaged teeth with crowns, fixed partial dentures, removable partial and complete dentures, and implant prostheses. It is about 10% of the Virtual OSCE in NDEB's 2026 blueprint. Questions ask you to classify the edentulous situation, judge abutment and restorability, choose a prosthesis and material, and solve problems with fit, occlusion and denture complaints.

A study feature written by ExamDragon, not part of the real exam. NDEB publishes the category and its weight, nothing finer; the 4 topics below are ours.

At a glance

Category 7
10%

of the Virtual OSCE, as NDEB weights it in its 2026 Protocol (plus or minus 5)

Weight
10%
Topics
4
Key terms
10

What this guide covers, topic by topic

  1. PR-1Restorability and crowns
  2. PR-2Removable partial dentures
  3. PR-3Complete dentures
  4. PR-4Fixed partial dentures and implants

PR-1Restorability and crowns

  • Judge restorability before planning a crown: remaining tooth structure, caries below the bone, crown to root ratio, periodontal support and endodontic status.
  • A ferrule of at least 1.5 to 2 mm of sound tooth structure above the finish line, encircling the tooth, reduces fracture of root-filled teeth.
  • Posts retain a core; they do not strengthen the root, and they are used only when there is too little coronal structure to hold the core.
  • Typical occlusal reduction is about 1.5 to 2 mm for all-ceramic and metal-ceramic crowns, and about 1 to 1.5 mm for full metal crowns; metal-ceramic facial reduction is about 1.2 to 1.5 mm.
  • Place margins supragingivally where possible; subgingival margins should not invade the supracrestal tissue attachment (biologic width), or chronic inflammation and bone loss result.
  • When caries extends below the bone crest, options are crown lengthening, orthodontic extrusion or extraction, decided by root length, furcation position and aesthetics.
  1. The situationTooth 15, root filled, has lost the buccal and palatal cusps. Remaining dentin stands 1 mm above the gingiva and the fracture extends 1 mm below the bone crest on the palatal.
  2. Step 1There is no ferrule and the margin would invade the supracrestal tissue attachment.
  3. Step 2Assess root length on the radiograph: a long root may allow surgical crown lengthening or orthodontic extrusion to create 2 mm of ferrule.
  4. Step 3Weigh the poorer crown to root ratio after lengthening and the cost against extraction and implant or fixed partial denture.
  5. Step 4If the tooth can be kept, place a post and core and a crown with a 2 mm ferrule after healing.
  6. Where questions turnPlacing a post to strengthen a weak root. A post adds retention for the core only and can increase the risk of root fracture.
  7. The takeawayWithout a ferrule, a crown on a root-filled tooth often fails; create one or reconsider keeping the tooth.
Practise Prosthodontics

PR-2Removable partial dentures

  • Kennedy Class I is bilateral distal extension, Class II unilateral distal extension, Class III a unilateral bounded space, and Class IV a single bounded anterior space crossing the midline.
  • Applegate rules: classification follows any extractions; the most posterior edentulous area decides the class; extra spaces are modification spaces; Class IV has no modifications.
  • Rests transfer load to the teeth and keep the framework in position; clasps provide retention; major connectors must be rigid.
  • Distal extension bases are supported partly by soft tissue, so they need a functional or altered cast impression and frequent relining as bone resorbs.
  • A survey of the diagnostic cast determines the path of insertion, guide planes, undercuts for clasps and areas needing modification of the teeth before impressions.
  • Mouth preparation (restorations, rest seats, guide planes) is done before the final impression, so the framework fits the prepared teeth.
  1. The situationA mandibular arch is missing 36, 37, 46, 47 and 31. 38 and 48 are absent. All other teeth are present.
  2. Step 1Both sides have edentulous areas with no natural tooth behind them: bilateral distal extension, Kennedy Class I.
  3. Step 2The additional space at 31 is a modification space.
  4. Step 3Classification: Kennedy Class I, modification 1.
  5. Step 4Plan rests next to the extension bases, a rigid lingual bar or plate, and a functional impression for the extension bases.
  6. Where questions turnClassifying before planned extractions are done, or counting a missing third molar that will not be replaced. Classify the arch as it will be when the denture is made.
  7. The takeawayThe most posterior edentulous area defines the Kennedy class; other spaces count as modifications.
Practise Prosthodontics

PR-3Complete dentures

  • Occlusal vertical dimension is the height with teeth in contact; rest vertical dimension is greater by the freeway space, usually about 2 to 4 mm.
  • Too great a vertical dimension causes clicking teeth, a strained look, sore ridges and difficulty with s sounds; too small causes a collapsed face, angular cheilitis and poor chewing.
  • Denture retention depends on border seal, close adaptation, saliva and peripheral extension; overextension causes ulcers and dislodgment during function.
  • Centric relation is recorded as the reference jaw position for complete dentures because it is reproducible.
  • Denture stomatitis is linked to Candida, poor denture hygiene and wearing dentures at night; treat with removal at night, cleaning and antifungal agents.
  • Flabby (fibrous) ridges and severe resorption may need a mucostatic impression, a relief or an implant-retained overdenture; two implants in the mandible greatly improve function.
  1. The situationA patient with new complete dentures complains the teeth click when speaking, the lower ridge is sore all over, and the face looks strained.
  2. Step 1Clicking teeth and a strained appearance point to an excessive occlusal vertical dimension.
  3. Step 2Measure rest and occlusal vertical dimensions; a freeway space below about 2 mm confirms the problem.
  4. Step 3Generalized soreness also fits constant loading from too little freeway space.
  5. Step 4Correct by recording a new jaw relation at a reduced vertical dimension and resetting the teeth, or remaking the denture if needed.
  6. Where questions turnAdjusting individual sore spots when the cause is the vertical dimension. Local relief does not fix a freeway space that is too small.
  7. The takeawayClicking and general soreness with new dentures suggest the vertical dimension is too high.
Practise Prosthodontics

PR-4Fixed partial dentures and implants

  • Abutment teeth need sound periodontal support, a favourable crown to root ratio (ideally 2:3, at least 1:1) and a common path of insertion.
  • Long spans increase flexing; deflection rises sharply with the span length, so long pontic spans need rigid connectors or another option.
  • Implants need enough bone volume and space: about 1.5 mm from adjacent teeth and about 3 mm between implants; CBCT helps plan near the inferior alveolar canal and sinus.
  • Implant risk factors include smoking, uncontrolled diabetes, history of periodontitis, head and neck radiation and antiresorptive drugs; they are not absolute contraindications but must be managed and discussed.
  • Peri-implantitis is inflammation with progressive bone loss around an implant; peri-implant mucositis has no bone loss and is reversible with plaque control.
  • Resin-bonded bridges suit single missing incisors in young patients with unrestored abutments and a favourable occlusion.
  1. The situationA 45 year old non-smoker lost 36 two years ago. 35 and 37 are unrestored with healthy periodontium. There is 9 mm of bone height above the inferior alveolar canal and 7 mm of ridge width.
  2. Step 1Options are an implant crown, a conventional fixed partial denture or a removable partial denture.
  3. Step 2Unrestored abutments argue against preparing them for a bridge.
  4. Step 3Bone height of 9 mm and width of 7 mm allow a standard or short implant while keeping a safety margin above the canal (about 2 mm).
  5. Step 4Present the options with risks, costs and maintenance, and record informed consent; the implant crown is often preferred here.
  6. Where questions turnPlanning an implant from a panoramic image alone near the inferior alveolar canal. Panoramic images distort, so a CBCT is used to measure bone to the canal.
  7. The takeawayWhen adjacent teeth are intact and bone is sufficient, an implant avoids cutting healthy teeth.
Practise Prosthodontics

Key terms

Ferrule
A collar of sound tooth structure above the finish line encircled by the crown; resists fracture.
Supracrestal tissue attachment
The connective tissue and epithelial attachment above the bone crest, formerly called biologic width.
Kennedy classification
A system for partially edentulous arches, Classes I to IV, based on the location of edentulous areas.
Rest
A rigid part of a removable partial denture that sits on a tooth and transfers vertical load to it.
Survey
Analysis of a cast with a surveyor to find the path of insertion, undercuts and guide planes.
Occlusal vertical dimension
The vertical distance between two facial points when the teeth or rims are in contact.
Freeway space
Difference between rest and occlusal vertical dimension, usually about 2 to 4 mm.
Centric relation
A reproducible jaw relationship with the condyles in their most stable position, independent of tooth contact.
Pontic
The artificial tooth of a fixed partial denture that replaces a missing tooth.
Peri-implantitis
Inflammation around an implant with progressive loss of supporting bone.
After this guide: A maxillary arch is missing 14, 15 and 16, with 17 still present, and nothing else. What is the Kennedy class?
Show the answer

Kennedy Class III, because the edentulous area is unilateral and bounded by teeth at both ends, and there are no other spaces to count as modifications.

Practise Prosthodontics

Built to NDEB's 2026 Virtual OSCE Protocol and its blueprint. The topics, explanations, worked examples and traps are ExamDragon's own. Every source this path is built on.