Skip to content

Get the app

Study guide · AFK · Area 2

Restorative, Prosthodontics, Implants

About 16% of the AFK · 5 topics

Restorative, Prosthodontics and Implants covers caries management, direct and indirect restorations, dental materials, fixed and removable prosthodontics and dental implants. It makes up about 16% of the AFK in NDEB's 2026 blueprint. Its questions test material choice, preparation principles, classification systems and the reasons restorations and prostheses succeed or fail.

A study feature written by ExamDragon, not part of the real exam. NDEB publishes the area and its weight, nothing finer; the 5 topics below are ours.

At a glance

Area 2
16%

of the AFK, as NDEB weights it in its 2026 Protocol (plus or minus 5)

Weight
16%
Topics
5
Key terms
11

What this guide covers, topic by topic

  1. RI-1Caries management and direct restorations
  2. RI-2Adhesion and resin composite
  3. RI-3Fixed prosthodontics
  4. RI-4Removable prosthodontics
  5. RI-5Dental implants

RI-1Caries management and direct restorations

  • Noncavitated lesions can often be arrested with fluoride, sealants or resin infiltration; restore when there is cavitation, a lesion into dentin that cannot be cleaned, or esthetic and functional need.
  • In deep caries, selective removal (leaving firm or leathery dentin over the pulp while the periphery is cleaned to hard dentin) lowers the risk of pulp exposure compared with removal to hard dentin everywhere.
  • G.V. Black classes: I pits and fissures, II proximal of posterior teeth, III proximal of anterior teeth without the incisal angle, IV proximal of anterior teeth including the incisal angle, V cervical third of facial or lingual, VI incisal edges or cusp tips.
  • Amalgam has no adhesion, so it depends on mechanical retention, a cavosurface angle near 90 degrees and adequate bulk (about 1.5 to 2 mm); high-copper alloys removed the weak gamma-2 phase and improved corrosion resistance and marginal integrity.
  • Glass ionomer bonds chemically to tooth by ion exchange with calcium, releases and takes up fluoride, and suits high-risk patients and cervical lesions, but it has lower strength than composite.
  1. The situationA Class V lesion on the root surface of a patient with xerostomia and many new root caries lesions. Which material is best?
  2. Step 1The patient is at high caries risk and the margin is on root dentin, where moisture control is hard.
  3. Step 2Glass ionomer or resin-modified glass ionomer bonds chemically, tolerates some moisture better than composite and releases fluoride.
  4. Step 3The lesion is not under heavy occlusal load, so lower strength is acceptable.
  5. Step 4Pair the restoration with risk control: high-fluoride toothpaste, fluoride varnish and management of the dry mouth.
  6. Where questions turnChoosing composite because it looks better, without weighing caries risk and moisture control at a root margin.
  7. The takeawayFor high-risk root caries in a hard-to-isolate area, choose a glass ionomer based material and treat the cause.
Practise Restorative, Prosthodontics, Implants

RI-2Adhesion and resin composite

  • Enamel bonding relies on etching with 30 to 40% phosphoric acid (about 15 to 30 seconds), which creates micro-porosities that resin tags lock into.
  • Dentin bonding forms a hybrid layer of resin interlocked with exposed collagen; overdrying etched dentin collapses the collagen and weakens the bond, so etch-and-rinse systems need a moist (not wet) surface.
  • Composite shrinks as it polymerizes, causing stress at the bonded interface; the configuration factor (C-factor) is the ratio of bonded to unbonded surfaces, so a Class I preparation (C-factor about 5) is highest risk.
  • Placing composite in increments of about 2 mm or less, or using a properly indicated bulk-fill material, limits shrinkage stress and ensures complete curing.
  • Light curing depends on adequate intensity, correct wavelength for the photoinitiator (camphorquinone absorbs blue light near 470 nm), short tip distance and sufficient time.
  • Eugenol-containing temporary materials inhibit resin polymerization, so avoid them under planned composite or resin cement.
  1. The situationA patient reports sensitivity on biting one week after a large posterior composite. What are the likely causes?
  2. Step 1Pain on biting soon after a composite suggests polymerization shrinkage stress causing cuspal flexure, a gap, or a high restoration.
  3. Step 2Check the occlusion first, as a high contact is the simplest and most common fix.
  4. Step 3Consider technique: bulk placement in a high C-factor cavity or overdried dentin can cause postoperative sensitivity.
  5. Step 4Rule out a cracked cusp or pulpal inflammation with bite and cold testing.
  6. Where questions turnThinking a lower C-factor means more stress; a higher ratio of bonded to free surfaces raises stress.
  7. The takeawayPostoperative sensitivity after composite usually traces to occlusion, shrinkage stress or bonding technique, and incremental placement prevents much of it.
Practise Restorative, Prosthodontics, Implants

RI-3Fixed prosthodontics

  • Retention and resistance depend on taper, preparation height, surface area and features such as grooves; a small total occlusal convergence (ideally about 6 degrees, clinically up to roughly 10 to 20 degrees) improves retention.
  • A ferrule of at least 1.5 to 2 mm of sound vertical tooth structure above the finish line greatly improves the fracture resistance of an endodontically treated tooth with a post and core.
  • The supracrestal tissue attachment (formerly biologic width) is about 2 mm of junctional epithelium and connective tissue above the bone; placing a margin into it causes chronic inflammation or bone loss.
  • Crown lengthening aims for about 3 mm from the bone crest to the planned margin, to restore the supracrestal attachment plus a sulcus.
  • Ante's law suggests the combined root surface area of abutments should equal or exceed that of the teeth being replaced; long spans and cantilevers multiply stress.
  • Posterior teeth with root canal treatment and loss of marginal ridges benefit from cuspal coverage to reduce fracture risk.
  1. The situationA fractured premolar has its remaining structure ending 1 mm above the bone crest on the buccal. Can you place a crown?
  2. Step 1A margin 1 mm from bone would invade the roughly 2 mm supracrestal tissue attachment.
  3. Step 2That margin would cause persistent inflammation or bone loss and would give no ferrule.
  4. Step 3Surgical crown lengthening (or orthodontic extrusion) can create about 3 mm from bone to margin plus a ferrule.
  5. Step 4Assess the crown to root ratio after lengthening; if it becomes poor, extraction and replacement may be the better option.
  6. Where questions turnPlacing a subgingival margin right at the bone to gain retention, which violates the supracrestal tissue attachment.
  7. The takeawayWhen tooth structure ends close to the bone, restore the supracrestal attachment and ferrule first, or reconsider the tooth's prognosis.
Practise Restorative, Prosthodontics, Implants

RI-4Removable prosthodontics

  • Kennedy classes: I bilateral edentulous areas posterior to remaining teeth, II unilateral posterior, III unilateral bounded by teeth front and back, IV a single bounded anterior area crossing the midline.
  • Applegate rules: classify after any planned extractions, ignore a missing third molar that will not be replaced, the most posterior edentulous area decides the class, extra areas are modifications, and Class IV has no modifications.
  • A partial denture needs support (rests), retention (clasps), stability (bracing elements and major connector rigidity) and reciprocation opposite each retentive clasp arm.
  • In complete dentures, vertical dimension of occlusion equals vertical dimension at rest minus the freeway space, usually about 2 to 4 mm; an excessive vertical dimension causes soreness and clicking teeth, too little causes angular cheilitis and a collapsed look.
  • The posterior palatal seal is placed at the vibrating line between the movable and immovable soft palate to give a peripheral seal.
  • Denture stomatitis is most often linked to Candida, poor denture hygiene and wearing dentures overnight; treat by removing dentures at night, cleaning them, and using an antifungal when indicated.
  1. The situationA patient is missing 17, 16, 15, 26 and 27 (third molars missing and not to be replaced), plus 12. Classify the arch.
  2. Step 1Both sides have edentulous areas with no tooth behind them: 17 to 15 on the right and 26 to 27 on the left.
  3. Step 2Bilateral distal extension areas make it Kennedy Class I.
  4. Step 3The bounded space at 12 is an additional edentulous area, so it counts as one modification.
  5. Step 4The arch is Kennedy Class I, modification 1.
  6. Where questions turnCalling a single anterior space a Class IV when posterior spaces also exist; the posterior areas decide the class and the anterior space becomes a modification.
  7. The takeawayFind the most posterior edentulous areas first to set the class, then count every other space as a modification.
Practise Restorative, Prosthodontics, Implants

RI-5Dental implants

  • Osseointegration is direct structural and functional contact between living bone and the implant surface without intervening soft tissue.
  • Common spacing guides: at least 1.5 mm from implant to adjacent tooth, at least 3 mm between adjacent implants, and a safety margin of about 2 mm above the inferior alveolar canal.
  • Risk factors for failure and peri-implantitis include smoking, poorly controlled diabetes, a history of periodontitis, poor plaque control and radiation to the jaw.
  • Antiresorptive drugs (bisphosphonates, denosumab) raise the risk of medication-related osteonecrosis of the jaw, especially with high cancer-treatment doses; take a full history before implant surgery.
  • Peri-implant mucositis is reversible inflammation of the soft tissue without bone loss; peri-implantitis adds progressive bone loss beyond initial remodelling.
  • Implants lack a periodontal ligament, so they do not move with the teeth, cannot be orthodontically moved, and give less proprioceptive feedback.
  1. The situationProbing around an implant crown shows bleeding and suppuration with 6 mm depth, and a radiograph shows bone loss compared with the baseline image at loading. Diagnosis?
  2. Step 1Bleeding alone without bone loss would be peri-implant mucositis.
  3. Step 2Bone loss beyond initial remodelling compared with baseline, plus bleeding or suppuration, defines peri-implantitis.
  4. Step 3Look for causes: excess cement, poor hygiene access, smoking, history of periodontitis.
  5. Step 4Manage with mechanical debridement and hygiene correction, then surgical therapy if it does not resolve.
  6. Where questions turnDiagnosing peri-implantitis from deep probing alone without comparing bone levels to a baseline radiograph.
  7. The takeawayPeri-implantitis needs bone loss compared with a baseline radiograph; without it the diagnosis is mucositis.
Practise Restorative, Prosthodontics, Implants

Key terms

C-factor
Ratio of bonded to unbonded surfaces in a cavity preparation; higher values mean more shrinkage stress for composite.
Hybrid layer
Zone where resin interlocks with demineralized dentin collagen, forming the dentin bond.
Selective caries removal
Removing caries to hard dentin at the periphery while leaving firm or leathery dentin near the pulp.
Ferrule
Band of sound tooth structure above the finish line encircled by the crown, which resists fracture.
Supracrestal tissue attachment
Junctional epithelium and connective tissue attachment above the alveolar crest, about 2 mm tall; formerly called biologic width.
Ante's law
Guideline that abutment root surface area should equal or exceed that of the teeth replaced by a fixed bridge.
Kennedy classification
System for classifying partially edentulous arches by the location of edentulous areas.
Freeway space
Difference between vertical dimension at rest and vertical dimension of occlusion, usually about 2 to 4 mm.
Vibrating line
Junction of the movable and immovable soft palate, marking the posterior limit of a maxillary denture.
Osseointegration
Direct contact between living bone and the implant surface without soft tissue between them.
Peri-implantitis
Inflammation around an implant with progressive bone loss.
After this guide: Why does a Class I composite restoration carry more risk of shrinkage stress than a Class IV?
Show the answer

A Class I cavity has five bonded walls and one free surface (C-factor about 5), so shrinkage stress cannot be relieved by flow from free surfaces. A Class IV has few bonded walls and much free surface, so stress is lower.

Practise Restorative, Prosthodontics, Implants

Built to NDEB's 2026 AFK Protocol and its blueprint. The topics, explanations, worked examples and traps are ExamDragon's own. Every source this path is built on.